Briggs OHV Singles
G-Force Racing Engine
Of course we know they're out, and we know that there are a good many of them on the circuit. Do we work on them at G-Team?? Of course we do!!
-
14.5 hp 28 CID OHV Single Briggs and Stratton
-
17 hp 31 CID OHV Single Briggs and Stratton
Although we don't see enough of the Briggs OHV Singles at the G-Team shop to maintain a full line of parts for them, or offer prices on complete engines, we do keep some parts on hand, and we do have sources for whatever OHV Single parts you might need. Likewise, the mad machinist here at G-Team is well versed at grinding and shaping all natures of cams and cranks, and thus the machine work you need to G-Force your 28 or 31 CID OHV Single is available here at G-Team Racing.
If you need work done on your OHV Single contact G-Team for current availbility of parts, and a quote on the machine work you need done.
- Add-ons and Upgrades - To the OHV Singles!
Additonal mods and or up grades are available at additional costs.
Simply take the long block price and start adding options to it!
*** For OHV Single Motors ONLY! ***
-
Modify Walbro Carb with air cleaner adapter.
G-Team Price w/Carb Exchange ~ call Don @ 701 400 4084
G-Team Price wo/Carb Exchange ~ call Don @ 701 400 4084
-
New Briggs Walbro Carb fully modified with air cleaner adapter
(Specify if you want gravity feed or pump feed)
For G-Team Pricing, call Don @ 701 400 4084
-
Air filter (K&N style paper filter) fits 2.75 OD air cleaner adapter 4x4 1/2
For G-Team Pricing, call Don @ 701 400 4084
-
New Briggs Fuel pump #808656
For G-Team Pricing, call Don @ 701 400 4084
-
Briggs OHV Single Racing Cam
For G-Team Pricing, call Don @ 701 400 4084
-
Briggs OHV Single Crank Kit
New "Small" Briggs Piston (STD bore only. Oversize extra) and wrist pin, ARC Billet rod for small journal cranks. Machining and balancing crank labor (must provide small journal crank in good shape)
For G-Team Pricing, call Don @ 701 400 4084
-
New Briggs Oil Pan with thrust bearing and cam bearing installed.
For G-Team Pricing, call Don @ 701 400 4084
-
New ARC Brass Counter Balance parts
For G-Team Pricing, call Don @ 701 400 4084
-
Briggs OHV Single Head Mod -
We start with your head, shave it, port it, clean it up and install new Stainless Steel Valves, Springs, Retainers, and Keepers!
For G-Team Pricing, call Don @ 701 400 4084
-
New Briggs High Torque Standard Starter
For G-Team Pricing, call Don @ 701 400 4084
-
New Briggs HD Nippendenso Starter
For G-Team Pricing, call Don @ 701 400 4084
*** Don't have the Necessary Cores for any of the above items***
Contact G-Team Racing for current availbility and pricing of cores.
Parts needed for cores are listed below. They should be good rebuildable and rust free
parts. No broken or damaged parts.
- OHV Single Block. I/C or cast iron sleeve.
- Oil pan and pan bolts
- Cylinder head, head bolts and head tin
- Crankshaft with gear.
(Do not ship syncro balance parts with your crank, they will no longer be needed.)
- Camshaft rust free and NOT bent.
- Oil slinger.
(Make sure the hole where the camshaft goes through is not out of round.)
- Valves spring and hardware. All valve train components.
- If work to a carb is done then a good Briggs and Stratton two piece Walbro carb and
intake is needed in good and clean and rust free condition.
Shipping Address:
Address -
Don Gienger ~ G-Team Racing
735 Concord Dr.
Bismarck ND 58504
Phone -
Home: (701) 255-6160
Cell: (701) 400-4084
E-mail -
gteam@qwest.net
donmownator@g-team.us
Shipping Charges
Shipping charges may vary depending on what you want and how fast you want it. I do my best to find the cheapest ways of shipping. Always e-mail or talk to me about the cost before ordering anything or sending money.
