Lawn Mower Racing ~ G-Team

  Lawn Mower Racing - G-Team



G-Team Front End Technology

** All G-Team front ends use Azusa Spindles for easy replacement.

G-Team Racing Standard Front End

 #1 Spindles only ~ You weld them on. They are the Azusa standard spindle set but have had the bottom ear cut and rewelded in a new location to use an adjustable rod end. This will allow you to adjust Camber only once welded to your tube. G-Team uses 5/8 Tie Rod ends.

For G-Team Pricing, call Don @ 701 400 4084

 #2 Spindles and welded to a 1 x 2 steel tubing ~ The Spindles will be welded in at a 12 degree angle so your caster is set. These are the spindles listed above, welded to a tube and set up for 6x6 rims so that total width will be 38 inches or less. If there is a width you really want or if your rims and tires are different than these specifications I will need to know so I get the right width right for you. This package is spindles and tube only. No center link.

For G-Team Pricing, call Don @ 701 400 4084

 #3 Axle Assembly ~ This option includes all of the above and the Center link too. This assembly comes with the center link NOT welded to the tube due to different types of mowers and space available. This kit also includes the tie rods and tie rod ends. 

For G-Team Pricing, call Don @ 701 400 4084

 #4 Complete Axle ~ Axle complete with center link and tie rods and tie rod ends. Also included are the hubs. This comes with the hubs needed to mount your rims to the G-Team Standard Axle. Rims are available from G Team too, please inquire about specific sizes to meet your needs.

For G-Team Pricing, call Don @ 701 400 4084



Top

So what is the F.A.S.T. Front End? - Fully Adjustable Steering Technology

G-Team Racing F.A.S.T. Front End

 #1 Spindles only - This is a pair of F.A.S.T spindles. You weld them on.
These spindles use 5/8 ends. There are washers in place so you can adjust up and down and they have a full 10 degree slot in them for forward and backward positive or negative caster. Camber and width can be adjusted too with the ends moving in and out up to 3 inches total width change.

For G-Team Pricing, call Don @ 701 400 4084

#2 Spindles and Tube - This is the above parts and welded to a 1x2 steel tube. You tell me how wide or what tires and rims you are using and I will set it up for your set up. NO center link.

For G-Team Pricing, call Don @ 701 400 4084

#3 Axle Assembly - This is the above work and parts PLUS the Center link and tie rods and tie rod ends. You add hubs and rims and tires.

For G-Team Pricing, call Don @ 701 400 4084

#4 Complete Axle - This is the F.A.S.T. front end complete with all the parts above and hubs too. This way you can pick your width on rims and tires.

For G-Team Pricing, call Don @ 701 400 4084


Top

Miscellaneous Parts Front End Parts

Center Link - G Team Racing has been using this center link design for years. It is something you now can use on your mower to fix Acherman Steering into your ride.

For G-Team Pricing, call Don @ 701 400 4084

  Azusa Spindles -
  • Just spindles
    For G-Team Pricing, call Don @ 701 400 4084
  • Azusa spindles as listed above. But this is using a Grade 8 bolts for the spindle.
    For G-Team Pricing, call Don @ 701 400 4084

Top


Contact G-Team Racing to place your order today!

 
About G-Team Racing | Site Map | Privacy Policy | Contact G-Team | G-Team Webmaster | ©2005 G-Team Racing
Page last updated on January 30, 2009
Dakota SEO & Design